150 Watt HID LED Replacement – 30W LED HID Retrofit Kit – 4950 lumens


Sku: MLLG-LED-RETRO5-30-[Color]-[HV]-1238

The Perfect 150W HID Replacement

• Watts: 30 • Lumens: 4950 • LM/W: 165
• Voltage: 100-277V [D]
• Replaces: 150W Metal Halide
• Life: 100,000 (L70) hours | 50,000 hrs – driver

BAAETLDLC Premium10 year warrantyQuick Ship100-277Vcontrolsready
Optionally available for BAA (Buy America Act).

Large Quote Request



Part NumberMLLG-LED-RETRO5-30-[Color]-[HV]
Replaces150W Metal Halide
Lumens Per Watt165
Voltage100-277V [D]
Frequency50/60 hz
Life Hours100,000 (L70) hours | 50,000 hrs – driver
Color Temp4000K | 5000K
Beam Angle120°
Optics120° Standard
Operating Temp-35°C to +55°C
MountingMultiple mounting options
Dimensions4.75″ L x 4.75″ W x 1.9″ H
Warranty10 years
TheLightingCenter 30W LED Retrofit Kit for HID Fixtures is the perfect 150 Watt Metal Halide LED Replacement in your existing fixture with a simple and easy to perform retrofit process. Our 30W Retrofit for HID is extremely energy efficient and are DLC Premium Qualified meaning it meets higher lumen efficiency standards and outperforms those products that are only DLC Standard Qualified. These kits are 20-30% brighter than DLC Standard Kits. 

Up to 165 lumens per watt, depending on the chosen color temperature. We recommend 5000K as the perfect replacement for Metal Halide. These kits come available with multiple mounting options. Our kits do not come with a socket adapter as this is an unsafe mounting option and is not allowed under the DLC Premium Quality certification.


  • Our 30W Retrofit Kit for HID wins in life rating, wattage savings, payback, CRI, and the ability to retrofit in 99% of existing Metal Halide and High Pressure Sodium fixtures.
  • LED Source: Nichia Corporation
  • Driver: Meanwell 100-277V
  • Warranty: 10 years on head and bracket, 5 years on driver


  • 4000K
  • BAA (Buy America Act)
  • 0-10V Dimming


Installation Guide


  1. Remove bulb, ballast, reflector and socket from existing fixture.
  2. Install mounting arm system using the mounting holes of the removed socket
  3. Slide the retrofit head onto the mounting arm, and attach the safety wire
  4. Install the driver in the space where the ballast was installed.
  5. Connect the black and red wires of the driver to the black and red wires of the retrofit head
  6. Connect the input wires to the power cord coming into the fixture.

Energy Savings

30 LED Watts replacing 150 Watts for 12 hrs/day 365 days/yr saving 624 kw/year *

Cost per kw/hSavings per year

* includes ballast draw

Copyright © 2008 - 2019 · TheLightingCenter · All rights reserved.