1000 Watt Metal Halide LED Retrofit – 280 Watts – 43120 lumens

$426.56

 
Sku: MLLG-LED-RETRO5-280-[Color]-[HV]-1246

43000+ lumens to replace 1000W HID

• Watts: 280 • Lumens: 43120 • LM/W: 154
• Voltage: 100-277V [D] | 277-480V [HV]
• Replaces: 1000W Metal Halide
• Life: 100,000 (L70) hours | 50,000 hrs – driver

BAAETLDLC Premium10 year warrantyQuick Ship100-277V277-480Vcontrolsready
Optionally available for BAA (Buy America Act).

Large Quote Request

Description

Specifications

Part NumberMLLG-LED-RETRO5-280-[Color]-[HV]
Watts280
Lumens43120
Replaces1000W Metal Halide
Lumens Per Watt154
Voltage100-277V [D] | 277-480V [HV]
Frequency50/60 hz
Life Hours100,000 (L70) hours | 50,000 hrs – driver
Color Temp4000K | 5000K
CRI75+
Beam Angle120°
Operating Temp-35°C to +55°C
MountingMultiple mounting options
Dimensions10.6″ L x 10.0″ W x 2.85″ H
Weight7
Warranty10 years
TheLightingCenter 280W LED Retrofit Kit is designed as a 1000w metal halide led replacement in your existing fixture with a simple and easy to perform retrofit process. Our X-Large Series Retrofits are extremely energy efficient and are DLC Premium Qualified meaning it meets higher lumen efficiency standards and outperforms those products that are only DLC Standard Qualified. These kits are 20-30% brighter than DLC Standard Kits. 

Our X-Large Series LED Bulb and Ballast Replacement Kits are perfect for a variety of fixtures including

  • Parking Lot lights and Area Lights
  • Flood Lights
  • Stadium Lights
  • High Mast Lights

 

Please note: the reflector inside the fixture must
be removed as part of the installation process of this product. The
reflector is not needed because LED is directional light and there is no
light to reflect. Removing the reflector also increases the available
cooling area inside the fixture.

Easy Installation Steps

  1. Remove bulb, ballast, reflector and socket from existing fixture.
  2. Install retrofit mount arm system using the mounting holes of the removed socket
  3. Slide the retrofit head onto the mounting arm, and attach the safety wire
  4. Install the driver in the space where the ballast was installed.
  5. Connect the black and red wires of the driver to the black and red wires of the retrofit head.
  6. Connect the input wires to the power cord coming into the fixture.

280W LED Retrofit Kit installed in flood light to replace 1000W HID

Features

  • Our 280W LED Retrofit Kit wins in life rating, wattage savings, payback, CRI, and the ability to retrofit in 99% of existing Metal Halide and High Pressure Sodium fixtures.
  • LED Source: Nichia Corporation
  • Beam Angle:  120°
  • Driver: Meanwell 100-277V or 480V High Voltage
  • Warranty: 10 years on head and bracket, 5 years on driver

Options

  • 277V-480V
  • 4000K
  • BAA (Buy America Act)
  • 0-10V Dimming

Photometrics

Installation Guide

Energy Savings

280 LED Watts replacing 1000 Watts for 12 hrs/day 365 days/yr saving 3811 kw/year *

Cost per kw/hSavings per year
.06$229
.08$305
.10$381
.12$457
.14$533
.16$610
.18$686
.20$762

* includes ballast draw

Copyright © 2008 - 2019 · TheLightingCenter · All rights reserved.